Images are for reference purposes only and product appearances/colours may vary.
With its improved composition, the ARCTIC MX-6 has a measurably lower thermal resistance than the MX-4. The basis for calculation is the temperature difference between the cooler base and the heat source (in C) in relation to the applied heat load (in W), which also results in the unit C/W. The higher the thermal resistance, the worse the heat can be transferred through the TIM layer. The higher the thermal resistance, the worse the heat can be transferred through the TIM layer. Thermal insulators, as an example, therefore always have a particularly high thermal resistance, while thermal interface materials usually have a particularly low one. The ARCTIC MX-6 is a carbon filler-based thermal paste and reaches its maximum performance without burn-in, directly after application and distribution. It achieves all of this without any reputed ingredients, such as expensive diamond dust or various precious metal particles. The silicone gel used as a carrier enables optimal distribution, which is achieved through even contact pressure, for example when mounting the heat sink.
SKU | ACTCP00079A |
Thermal Resistance | 1.8 x 1012 Ω-cm |
Thermal Conductivity | Not Specified |
Electrical Conductivity | 0 pS/m |
Viscosity | 45.000 poise |
Specific Weight | 2.6g/cm3 |
Temperature Range | -50°C to +150°C |
Size | 2g / 0.8ml |
Manufacturer | |
Manufacturer's Website | Link * |
Product Website | Link * |
Warranty Information | |
Warranty Duration | None |
Arctic MX-6 Ultimate Performance Thermal Paste, 2g
- In Stock with Progenix
- Excellent Thermal Conductivity
- No Curing Time
- No Electrical Conductivity
- Temperature Range: -150°C to +250°C
- Size: 2g / 0.8ml
- Product Code: ACTCP00079A
- Availability: In Stock
- R199
-
R149