Supports up to 10 fans, with large area of vents around lower chamber, allowing for bottom-to-top vertical airflow. Fine mesh on the top and right panel, and a great number of vents on the front, left and bottom of lower chamber provide massive airflow. Supports simultaneous installation of 360mm radiators on the top and side. Remove the small cover on the PSU shroud to install a side radiator. Overall thickness up to 70mm. No interference between side radiator with standard thickness (52mm) and RTX 4090. Configured with 7 reusable PCI slot covers, which can be turned 90* to mount the GPU vertically (additional riser cable needed). Plug in cables from behind to give front a cleaner look and a smoother airflow channel. Right flip door supports up to 2 x 3.5" HDD /2.5" SSD and 2 x 2.5" SSD. The tray in the case bottom accommodates another 3.5" HDD/2.5" SSD. Supports multiple hard drives, with different compatibility depending on the form factor of installed motherboard, 3 x 3.5" HDD or 5 x 2.5" SSD at most. Provides 2 Velcro straps on the back of motherboard to avoid cable clutter, and 2 Velcro straps at the rear for easier management of peripheral cables. With a cable management space of 32mm and a removable flip-door cable cover, allowing for unobstructed cable management.