• Support for 7th/6th Generation Intel Core i7 processors/Intel Core i5 processors/Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1151 package
  
• L3 cache varies with CPU

• Intel H110 Express Chipset
  

• 2 x DDR4 DIMM sockets supporting up to 32 GB of system memory
  * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
• Dual channel memory architecture
• Support for DDR4 2400/2133 MHz memory modules
• Support for ECC UDIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
• Support for non-ECC UDIMM 1Rx8/2Rx8/1Rx16 memory modules
• Support for Extreme Memory Profile (XMP) memory modules
  * To support 2400 MHz or XMP memory, you must install a 7th generation processor.

Integrated Graphics Processor - Intel HD Graphics support:

• 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

Maximum shared memory of 1 GB

• Realtek ALC887 codec
  
• High Definition Audio
• 2/4/5.1/7.1-channel
  * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
• Support for S/PDIF Out

• Realtek GbE LAN chip (10/100/1000 Mbit)

• None

• 1 x PCI Express x16 slot, running at x16
  (The PCI Express x16 slot conforms to PCI Express 3.0 standard.)
• 5 x PCI Express x1 slots
  (All of the PCI Express x1 slots conform to PCI Express 2.0 standard.)
  * When two or more graphics cards are installed, be sure to connect the power cable from the power supply to the PCIE_12V_1 or PCIE_12V_2 connector to provide sufficient current to the system and prevent damage to the devices.

• None

Chipset

• 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA SSD support)
  
• 4 x SATA 6Gb/s connectors
  * Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors.

Chipset :

• 4 x USB 3.1 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)
  
• 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)

• 1 x 24-pin ATX main power connector
  
• 1 x 8-pin ATX 12V power connector
• 2 x PCIe power connectors
• 1 x CPU fan header
• 3 x system fan headers
• 4 x SATA 6Gb/s connectors
• 1 x M.2 Socket 3 connector
• 1 x front panel header
• 1 x front panel audio header
• 1 x S/PDIF Out header
• 1 x USB 3.1 Gen 1 header
• 2 x USB 2.0/1.1 headers
• 1 x Trusted Platform Module (TPM) header
• 1 x Clear CMOS jumper

• 1 x PS/2 mouse port
  
• 1 x PS/2 Keyboard port
• 1 x parallel port
• 1 x serial port
• 1 x D-Sub port
• 2 x USB 3.1 Gen 1 ports
• 2 x USB 2.0/1.1 ports
• 1 x RJ-45 port
• 3 x audio jacks (Line In, Line Out, Mic In)

• iTE I/O Controller Chip

• Voltage detection
  
• Temperature detection
• Fan speed detection
• Overheating warning
• Fan fail warning
• Fan speed control
  * Whether the fan speed control function is supported will depend on the cooler you install.

• 2 x 64 Mbit flash
  
• Use of licensed AMI UEFI BIOS
• Support for DualBIOS
• PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

• Support for APP Center
  * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
  3D OSD
  @BIOS
  Ambient LED
  AutoGreen
  Cloud Station
  EasyTune
  Fast Boot
  ON/OFF Charge
  Smart TimeLock
  Smart Keyboard
  Smart Backup
  System Information Viewer
  USB Blocker
• Support for Q-Flash
• Support for Xpress Install

• Norton Internet Security (OEM version)
  
• cFosSpeed

• Windows 10 64-bit (for 7th Generation Intel Processors)
  
• Windows 10 64-bit / Windows 8.1 64-bit / Windows 7 32-bit / 64-bits (for 6th Generation Intel Processors)
  * Please download the "Windows USB Installation Tool" from GIGABYTE's website and install it before installing Windows 7.

• ATX Form Factor, 30.5cm x 19.0cm